Spécifications:

2.4G Frequency Transmitter and Receiver. The receiver can be used via the infrared remote control or by hand. You can monitor the wireless transmissions from the camera on a TV, LCD, ect and record the transmissions.

This set comes with 1 reciever and 4 cameras.

Receiver Specifications

Receiving Frequency: ISM 2400~2483Mhz
Intermediate Frequency: 480Mhz
Frequency Stabilization: +/-100Khz
Demodulation Mode: FM
Antenna: 50ohm SMA
Receiving Sensitivity: <-85dBm
Video Output: 1Vp-p@75, S/N>38dB
Audio Output: 1Vp-P@600
Power Adapter: DC 12V/500mA
Dimension: 120x99x30mm (LxWxD)
Manual or Remote Controlled
Four Channels Available
Channel Scan and Channel Skip for multiple Cameras


Camera Specifications

Image Device: 1/3 Inch OmniVision CMOS
TV system: PAL 628(H)x568(V) NTSC 510(H)x496(V)
Horizontal Definition: 380TV Line
Angular Field of View: 45deg(f=6mm)
Minimum Illumination: 3.0Lux(F1.2)
Synchronization System: Internal
Scanning Freq(H): 15.625KHz PAL / 15.734KHz NTSC
Scanning Freq(V): 50Hz PAL / 60Hz NTSC
Backlight Compensation: Auto
Electronic Shutter: 1/50(1/60)~1/100,000sec
White Balance: Auto
S/N Ratio: >48dB
Gamma Correction: >0.45
Operation Temperature: -10~50 deg C
Transmission Frequency: ISM 2,400~2483MHz
Locked Frequencies
Power Adapter: DC8V/500mA
Dimension: 32x25x53mm LxWxD
Built In Microphone
Recommended Range for Objects: 1-8M. Max effective range 10M.
Transmission Range: 100m without interference

Si vous avez des questions n'hésiter pas à nous contactez par email. Vous pouvez également nous laisser un message sur notre boîte vocale en composant le numéro suivant : 1-877-312-7337. Nous allons vous répondre dans un délai de 24 Heures.